Doppler Mitral Valve

The Doppler effect or Doppler shift (or simply Doppler, when in context) is the change in frequency of a wave in relation to an observer (physics), observer who is moving relative to the wave source. It is named after the Austrian physicist Christian Doppler, who described the phenomenon in 1842.

A common example of Doppler shift is the change of pitch (music), pitch heard when a vehicle sounding a horn approaches and recedes from an observer. Compared to the emitted frequency, the received frequency is higher during the approach, identical at the instant of passing by, and lower during the recession.

The reason for the Doppler effect is that when the source of the waves is moving towards the observer, each successive wave Crest (physics), crest is emitted from a position closer to the observer than the crest of the previous wave. Therefore, each wave takes slightly less time to reach the observer than the previous wave. Hence, the time between the arrivals of successive wave crests at the observer is reduced, causing an increase in the frequency. While they are traveling, the distance between successive wave fronts is reduced, so the waves "bunch together". Conversely, if the source of waves is moving away from the observer, each wave is emitted from a position farther from the observer than the previous wave, so the arrival time between successive waves is increased, reducing the frequency. The distance between successive wave fronts is then increased, so the waves "spread out".

For waves that propagate in a medium, such as sound waves, the velocity of the observer and of the source are relative to the medium in which the waves are transmitted. The total Doppler effect may therefore result from motion of the source, motion of the observer, or motion of the medium. Each of these effects is analyzed separately. For waves which do not require a medium, such as electromagnetic waves or Gravitational wave, gravitational waves, only the relative difference in velocity between the observer and the source needs to be considered. When this relative velocity is not negligible compared to the speed of light, a more complicated relativistic Doppler effect arises.

History

Doppler first proposed this effect in 1842 in his treatise "''Über das farbige Licht der Doppelsterne und einiger anderer Gestirne des Himmels''" (On the coloured light of the binary stars and some other stars of the heavens).Alec Eden ''The search for Christian Doppler'', Springer-Verlag, Wien 1992. Contains a facsimile edition with an English language, English translation. The hypothesis was tested for sound waves by C. H. D. Buys Ballot, Buys Ballot in 1845. He confirmed that the sound's Pitch (music)#Pitch and frequency, pitch was higher than the emitted frequency when the sound source approached him, and lower than the emitted frequency when the sound source receded from him. Hippolyte Fizeau discovered independently the same phenomenon on electromagnetic waves in 1848 (in France, the effect is sometimes called "effet Doppler-Fizeau" but that name was not adopted by the rest of the world as Fizeau's discovery was six years after Doppler's proposal).Fizeau: "Acoustique et optique". ''Lecture, Philomatic Society, Société Philomathique de Paris'', 29 December 1848. According to Becker(pg. 109), this was never published, but recounted by M. Moigno(1850): "Répertoire d'optique moderne" (in French), vol 3. pp 1165–1203 and later in full by Fizeau, "Des effets du mouvement sur le ton des vibrations sonores et sur la longeur d'onde des rayons de lumière"; [Paris, 1870]. ''Annales de Chimie et de Physique'', 19, 211–221. In Britain, John Scott Russell made an experimental study of the Doppler effect (1848).

General

In classical physics, where the speeds of source and the receiver relative to the medium are lower than the velocity of waves in the medium, the relationship between observed frequency $f$ and emitted frequency $f_\text$ is given by:
$f = \left( \frac \right) f_0$
where
*$c$ is the propagation speed of waves in the medium;
*$v_\text$ is the speed of the receiver relative to the medium, added to $c$ if the receiver is moving towards the source, subtracted if the receiver is moving away from the source;
*$v_\text$ is the speed of the source relative to the medium, added to $c$ if the source is moving away from the receiver, subtracted if the source is moving towards the receiver.

Note this relationship predicts that the frequency will decrease if either source or receiver is moving away from the other.

Equivalently, under the assumption that the source is either directly approaching or receding from the observer:
$\frac = \frac = \frac$
where
*$v_$ is the wave's velocity relative to the receiver;
*$v_$ is the wave's velocity relative to the source;
*$\lambda$ is the wavelength.

If the source approaches the observer at an angle (but still with a constant velocity), the observed frequency that is first heard is higher than the object's emitted frequency. Thereafter, there is a monotonic decrease in the observed frequency as it gets closer to the observer, through equality when it is coming from a direction perpendicular to the relative motion (and was emitted at the point of closest approach; but when the wave is received, the source and observer will no longer be at their closest), and a continued monotonic decrease as it recedes from the observer. When the observer is very close to the path of the object, the transition from high to low frequency is very abrupt. When the observer is far from the path of the object, the transition from high to low frequency is gradual.

If the speeds $v_\text$ and $v_\text \,$ are small compared to the speed of the wave, the relationship between observed frequency $f$ and emitted frequency $f_\text$ is approximately

where
*$\Delta f = f - f_0$
*$\Delta v = -(v_\text - v_\text)$ is the opposite of the velocity of the receiver relative to the source: it is positive when the source and the receiver are moving towards each other.

File:Dopplereffectstationary.gif, Stationary sound source produces sound waves at a constant frequency , and the wave-fronts propagate symmetrically away from the source at a constant speed c. The distance between wave-fronts is the wavelength. All observers will hear the same frequency, which will be equal to the actual frequency of the source where .

File:Dopplereffectsourcemovingrightatmach0.7.gif, The same sound source is radiating sound waves at a constant frequency in the same medium. However, now the sound source is moving with a speed . Since the source is moving, the centre of each new wavefront is now slightly displaced to the right. As a result, the wave-fronts begin to bunch up on the right side (in front of) and spread further apart on the left side (behind) of the source. An observer in front of the source will hear a higher frequency and an observer behind the source will hear a lower frequency .

File:Dopplereffectsourcemovingrightatmach1.0.gif, Now the source is moving at the speed of sound in the medium (). The wave fronts in front of the source are now all bunched up at the same point. As a result, an observer in front of the source will detect nothing until the source arrives and an observer behind the source will hear a lower frequency .

File:Dopplereffectsourcemovingrightatmach1.4.gif, The sound source has now surpassed the speed of sound in the medium, and is traveling at 1.4 ''c''. Since the source is moving faster than the sound waves it creates, it actually leads the advancing wavefront. The sound source will pass by a stationary observer before the observer hears the sound. As a result, an observer in front of the source will detect nothing and an observer behind the source will hear a lower frequency .

Consequences

With an observer stationary relative to the medium, if a moving source is emitting waves with an actual frequency $f_0$ (in this case, the wavelength is changed, the transmission velocity of the wave keeps constant; note that the ''transmission velocity'' of the wave does not depend on the ''velocity of the source''), then the observer detects waves with a frequency $f$ given by
$f = \left ( \frac \right ) f_0$

A similar analysis for a moving ''observer'' and a stationary source (in this case, the wavelength keeps constant, but due to the motion, the rate at which the observer receives waves and hence the ''transmission velocity'' of the wave [with respect to the observer] is changed) yields the observed frequency:
$f = \left ( \frac \right ) f_0$

Assuming a stationary observer and a source moving at the speed of sound, the Doppler equation predicts a perceived momentary infinite frequency by an observer in front of a source that is traveling at the speed of sound. All the peaks are at the same place, so the wavelength is zero and the frequency is infinite. This overlay of all the waves produces a shock wave which for sound waves is known as a sonic boom.

When the source moves faster than the wave speed the source outruns the wave. The equation gives negative frequency values, which have no physical sense in this context (no sound at all will be heard by the observer until the source passes past them).

John William Strutt, 3rd Baron Rayleigh, Lord Rayleigh predicted the following effect in his classic book on sound: if the observer were moving from the (stationary) source at twice the speed of sound, a musical piece ''previously'' emitted by that source would be heard in correct tempo and pitch, but as if played ''backwards''.

Applications

Acoustic Doppler current profiler

An acoustic Doppler current profiler (ADCP) is a underwater acoustics, hydroacoustic current meter similar to a sonar, used to measure water current velocity, velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column. The term ADCP is a generic term for all acoustic current profilers, although the abbreviation originates from an instrument series introduced by Teledyne, RD Instruments in the 1980s. The working frequencies range of ADCPs range from 38 kHz to several Megahertz. The device used in the air for wind speed profiling using sound is known as SODAR and works with the same underlying principles.

Robotics

Dynamic real-time path planning in robotics to aid the movement of robots in a sophisticated environment with moving obstacles often take help of Doppler effect. Such applications are specially used for competitive robotics where the environment is constantly changing, such as robosoccer.

Sirens

A siren (alarm), siren on a passing emergency vehicle will start out higher than its stationary pitch, slide down as it passes, and continue lower than its stationary pitch as it recedes from the observer. Astronomer John Dobson (astronomer), John Dobson explained the effect thus:

In other words, if the siren approached the observer directly, the pitch would remain constant, at a higher than stationary pitch, until the vehicle hit him, and then immediately jump to a new lower pitch. Because the vehicle passes by the observer, the radial velocity does not remain constant, but instead varies as a function of the angle between his line of sight and the siren's velocity:
$v_\text = v_\text \cos(\theta)$
where $\theta$ is the angle between the object's forward velocity and the line of sight from the object to the observer.

Astronomy

The Relativistic Doppler effect, Doppler effect for electromagnetic waves such as light is of widespread use in astronomy to measure the speed at which stars and galaxy, galaxies are approaching or receding from us, resulting in so called blueshift or redshift, respectively. This may be used to detect if an apparently single star is, in reality, a close Binary star, binary, to measure the rotational speed of stars and galaxies, or to Doppler spectroscopy, detect exoplanets. This effect typically happens on a very small scale; there would not be a noticeable difference in visible light to the unaided eye.
The use of the Doppler effect in astronomy depends on knowledge of precise frequencies of spectral line, discrete lines in the electromagnetic spectroscopy, spectra of stars.

Among the List of nearest stars, nearby stars, the largest radial velocities with respect to the Sun are +308 km/s (BD-15°4041, also known as LHS 52, 81.7 light-years away) and −260 km/s (Woolley 9722, also known as Wolf 1106 and LHS 64, 78.2 light-years away). Positive radial velocity means the star is receding from the Sun, negative that it is approaching.

Redshift is also used to measure the Redshift#Expansion of space, expansion of space, but this is not truly a Doppler effect. Rather, redshifting due to the expansion of space is known as cosmological redshift, which can be derived purely from the Robertson-Walker metric under the formalism of general relativity. Having said this, it also happens that there ''are'' detectable Doppler effects on cosmological scales, which, if incorrectly interpreted as cosmological in origin, lead to the observation of redshift-space distortions.

Radar

The Doppler effect is used in some types of radar, to measure the velocity of detected objects. A radar beam is fired at a moving target — e.g. a motor car, as police use radar to detect speeding motorists — as it approaches or recedes from the radar source. Each successive radar wave has to travel farther to reach the car, before being reflected and re-detected near the source. As each wave has to move farther, the gap between each wave increases, increasing the wavelength. In some situations, the radar beam is fired at the moving car as it approaches, in which case each successive wave travels a lesser distance, decreasing the wavelength. In either situation, calculations from the Doppler effect accurately determine the car's velocity. Moreover, the proximity fuze, developed during World War II, relies upon Doppler radar to detonate explosives at the correct time, height, distance, etc.

Because the doppler shift affects the wave incident upon the target as well as the wave reflected back to the radar, the change in frequency observed by a radar due to a target moving at relative velocity $\Delta v$ is twice that from the same target emitting a wave:
$\Delta f=\fracf_0.$

Medical

An echocardiogram can, within certain limits, produce an accurate assessment of the direction of blood flow and the velocity of blood and cardiac tissue at any arbitrary point using the Doppler effect. One of the limitations is that the ultrasound beam should be as parallel to the blood flow as possible. Velocity measurements allow assessment of cardiac valve areas and function, abnormal communications between the left and right side of the heart, leaking of blood through the valves (valvular regurgitation), and calculation of the cardiac output. Contrast-enhanced ultrasound using gas-filled microbubble contrast media can be used to improve velocity or other flow-related medical measurements.

Although "Doppler" has become synonymous with "velocity measurement" in medical imaging, in many cases it is not the frequency shift (Doppler shift) of the received signal that is measured, but the phase shift (''when'' the received signal arrives).

Velocity measurements of blood flow are also used in other fields of medical ultrasonography, such as obstetric ultrasonography and neurology. Velocity measurement of blood flow in arteries and veins based on Doppler effect is an effective tool for diagnosis of vascular problems like stenosis.

Flow measurement

Instruments such as the laser Doppler velocimetry, laser Doppler velocimeter (LDV), and acoustic Doppler velocimetry, acoustic Doppler velocimeter (ADV) have been developed to measure velocity, velocities in a fluid flow. The LDV emits a light beam and the ADV emits an ultrasonic acoustic burst, and measure the Doppler shift in wavelengths of reflections from particles moving with the flow. The actual flow is computed as a function of the water velocity and phase. This technique allows non-intrusive flow measurements, at high precision and high frequency.

Velocity profile measurement

Developed originally for velocity measurements in medical applications (blood flow), Ultrasonic Doppler Velocimetry (UDV) can measure in real time complete velocity profile in almost any liquids containing particles in suspension such as dust, gas bubbles, emulsions. Flows can be pulsating, oscillating, laminar or turbulent, stationary or transient. This technique is fully non-invasive.

Satellites

Satellite navigation

The Doppler shift can be exploited for satellite navigation such as in Transit (satellite), Transit and DORIS (satellite system), DORIS.

Satellite communication

Doppler also needs to be compensated in satellite communication.
Fast moving satellites can have a Doppler shift of dozens of kilohertz relative to a ground station. The speed, thus magnitude of Doppler effect, changes due to earth curvature. Dynamic Doppler compensation, where the frequency of a signal is changed progressively during transmission, is used so the satellite receives a constant frequency signal. After realizing that the Doppler shift had not been considered before launch of the Huygens_(spacecraft)#Critical_design_flaw_partially_resolved, Huygens probe of the 2005 Cassini–Huygens mission, the probe trajectory was altered to approach Titan (moon), Titan in such a way that its transmissions traveled perpendicular to its direction of motion relative to Cassini, greatly reducing the Doppler shift. (offline as of 2006-10-14, se
Internet Archive version

Doppler shift of the direct path can be estimated by the following formula:
$f_ = \frac\cos\phi \cos\theta$
where $v_\text$ is the velocity of the mobile station, $\lambda_$ is the wavelength of the carrier, $\phi$ is the elevation angle of the satellite and $\theta$ is the driving direction with respect to the satellite.

The additional Doppler shift due to the satellite moving can be described as:
$f_ = \frac$
where $v_$ is the relative speed of the satellite.

Audio

The Leslie speaker, most commonly associated with and predominantly used with the famous Hammond organ, takes advantage of the Doppler effect by using an electric motor to rotate an acoustic horn around a loudspeaker, sending its sound in a circle. This results at the listener's ear in rapidly fluctuating frequencies of a keyboard note.

Vibration measurement

A laser Doppler vibrometer (LDV) is a non-contact instrument for measuring vibration. The laser beam from the LDV is directed at the surface of interest, and the vibration amplitude and frequency are extracted from the Doppler shift of the laser beam frequency due to the motion of the surface.

Developmental biology

During the Segmentation (biology), segmentation of vertebrate embryos, waves of gene expression sweep across the presomitic mesoderm, the tissue from which the precursors of the vertebrae (somites) are formed. A new somite is formed upon arrival of a wave at the Anatomical terms of location, anterior end of the presomitic mesoderm. In zebrafish, it has been shown that the shortening of the presomitic mesoderm during segmentation leads to a Doppler-like effect as the anterior end of the tissue moves into the waves. This effect contributes to the period of segmentation.

Inverse Doppler effect

Since 1968 scientists such as Victor Veselago have speculated about the possibility of an inverse Doppler effect. The size of the Doppler shift depends on the refractive index of the medium a wave is traveling through. But some materials are capable of negative refraction, which should lead to a Doppler shift that works in a direction opposite that of a conventional Doppler shift. The first experiment that detected this effect was conducted by Nigel Seddon and Trevor Bearpark in Bristol, United Kingdom in 2003. Later, the inverse Doppler effect was observed in some inhomogeneous materials, and predicted inside a Vavilov–Cherenkov cone.

See also

* Bistatic Doppler shift
* Differential Doppler effect
* Doppler cooling
* Dopplergraph
* Fading
* Fizeau experiment
* Photoacoustic Doppler effect
* Range rate
* Rayleigh fading
* Redshift
* Laser Doppler imaging
* Relativistic Doppler effect

Primary sources

References

Further reading

* Doppler, C. (1842). ''Über das farbige Licht der Doppelsterne und einiger anderer Gestirne des Himmels, Über das farbige Licht der Doppelsterne und einiger anderer Gestirne des Himmels (About the coloured light of the binary stars and some other stars of the heavens)''. Publisher: Abhandlungen der Königl. Böhm. Gesellschaft der Wissenschaften (V. Folge, Bd. 2, S. 465–482) [Proceedings of the Royal Bohemian Society of Sciences (Part V, Vol 2)]; Prague: 1842 (Reissued 1903). Some sources mention 1843 as year of publication because in that year the article was published in the Proceedings of the Bohemian Society of Sciences. Doppler himself referred to the publication as "Prag 1842 bei Borrosch und André", because in 1842 he had a preliminary edition printed that he distributed independently.
* "Doppler and the Doppler effect", E. N. da C. Andrade, ''Endeavour'' Vol. XVIII No. 69, January 1959 (published by ICI London). Historical account of Doppler's original paper and subsequent developments.
* David Nolte (2020). ''The fall and rise of the Doppler effect.'' Physics Today, v. 73, pgs. 31 - 35
DOI: 10.1063/PT.3.4429
*

External links

*


ScienceWorld

{{DEFAULTSORT:Doppler Effect
Doppler effects,
Wave mechanics
Radio frequency propagation
Radar signal processing
Sound
Acoustics